Why Does The Machining Accuracy Of Precision Parts Deteriorate?

1. The reason is that the machining accuracy of the parts itself is poor. Generally speaking, if the dynamic deviation in the middle of the shaft is not adjusted well during the installation and use process, or changes due to the damage of the transmission chain of the shaft transmission system, precision castparts it will endanger the accuracy of the parts. In general, the accuracy of text retrieval caused by such inaccuracies can moderate the amount of compensation processing. If the deviation is too large or even an alarm occurs, the AC servo motor must be checked to see if its speed ratio is too high.

2. The reason is that too many operations will also affect the machining accuracy of the machine tool, which may be due to the short acceleration and deceleration time, moderate expansion of the transition time, and of course, it is most likely due to the ball screw and AC servo motor. connection causes loosening.

3. The reason is that due to the concentricity deviation caused by the linkage of the two shafts, the mechanical equipment is not adjusted properly, precision auto parts resulting in the radial deformation of the circle, the compensation of the gap of the ball screw of the shaft is not correct, or the precise positioning of the shaft is offset, which may cause damage to the shaft. Accuracy of precision parts causes harm.